Shop

Showing 1–20 of 82 results

  • Automotive

    Automotive (65)

  • Electronics

    Electronics (48)

  • Home & Kitchen

    Home & Kitchen (12)

  • Kids

    Kids (9)

  • Outdoors

    Outdoors (1)

  • “Alabama Crimson Tide” Inserts for LumiSign

    $4.99

    “Alabama Crimson Tide” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Alumni Pepperdine” Inserts for LumiSign

    $4.99

    “Alumni Pepperdine” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Baby On Board” Inserts for LumiSign

    $4.99

    “Baby On Board” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Clemson Tigers” Inserts for LumiSign

    $4.99

    “Clemson Tigers” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Colorado State Rams” Inserts for LumiSign

    $4.99

    “Colorado State Rams” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Florida State Seminoles” Inserts for LumiSign

    $4.99

    “Florida State Seminoles” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Georgia Bulldogs” Inserts for LumiSign

    $4.99

    “Georgia Bulldogs” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Happy Halloween” Inserts for LumiSign

    $4.99

    “Happy Halloween” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Happy Hanukkah” Inserts for LumiSign

    $4.99

    “Happy Hanukkah” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Happy Holidays” Inserts for LumiSign

    $4.99

    “Happy Holidays” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “In God We Trust” Inserts for LumiSign

    $4.99

    “In God We Trust” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Louisville Cardinals” Inserts for LumiSign

    $4.99

    “Louisville Cardinals” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “LSU Tigers” Inserts for LumiSign

    $4.99

    “LSU Tigers” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Merry Christmas” Inserts for LumiSign

    $4.99

    “Merry Christmas” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Notre Dame Fighting Irish” Inserts for LumiSign

    $4.99

    “Notre Dame Fighting Irish” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Ohio State Buckeyes” Inserts for LumiSign

    $4.99

    “Ohio State Buckeyes” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Oklahoma Sooners” Inserts for LumiSign

    $4.99

    “Oklahoma Sooners” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Pepperdine MBA” Inserts for LumiSign

    $4.99

    “Pepperdine MBA” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Pepperdine School of Law” Inserts for LumiSign

    $4.99

    “Pepperdine School of Law” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart
  • “Student Driver” Inserts for LumiSign

    $4.99

    “Student Driver” Inserts for LumiSign

    $4.99

    PLUS FREE SHIPPING

    ***Top & Bottom Inserts Only – Must purchase LumiSign separately***

    LumiSign – The custom color license plate frame that lights up automatically / Installs in seconds / No wires / One frame, endless possibilities with interchangeable inserts

    Features:

    ● Battery operated and installs in seconds with no wires to install to car. Simply screw LumiSign in the same as a regular license plate frame with the included anti-theft security screws.

    ● Automatically lights up when you brake (or accelerate when placed on the front of a car) and stays on for 3 seconds.

    ● Automatically turns off to save batteries (which can last up to 6 months in low brightness mode).

    ● Choose from hundreds of interchangeable inserts that slide in to LumiSign without any tools needed while LumiSign remains secure on your car. Customize your own inserts here or choose from hundreds of pre-made inserts made in the USA. Additional inserts can be purchased now or later that use the same LumiSign frame so you can support your favorite team in the Fall, then easily swap out the inserts to support another team or cause in another season.

    ● Universal design allows LumiSign to slide up and down when installing to properly display your registration stickers in most states.

    ● 3 LED lights shine down to illuminate your license plate number.

    ● 3 brightness modes: low, medium, high

    ● Weatherproof patented design

    *Check local laws before adding batteries to illuminate the inserts and make sure registration stickers are visible when installing to the vehicle.

    INCLUDES:

    1 LumiSign Frame
    2 Inserts (1 Top and 1 Bottom)
    4 Anti-Theft Security Screws
    1 Special Installation Tool
    (Requires 4 AA batteries not included)

    Get 2 LumiSigns, 1 for the front and back of your car!

    Add to cart

Showing 1–20 of 82 results